Hello Guest it is January 02, 2025, 03:18:02 PM
Profile Guest
« previous next »
Pages: 1   Go Down

Author Topic: MPG problem  (Read 8610 times)

0 Members and 1 Guest are viewing this topic.

Offline boutje

*
  • 25 25
    • vvmracing racing parts
MPG problem
« on: January 04, 2014, 08:31:56 AM »
I have the following mpg problem with pokeys.

MPG/ pokeys is working fine in mach mill.

But i have also , with the same pokeys mpg pc , running a second profile.

And than the mpg is not working at all.
Logged

Offline NeoTO

*
  • 504 504
    • PoLabs
Re: MPG problem
« Reply #1 on: January 06, 2014, 12:10:23 AM »
Hi, boutje

Due to some restrictions, PoKeys plugin for Mach3 supports 1 profile.

Regards,
Matevž
Logged
www.poscope.com home of PoKeys USB HID, IO, USB, Ethernet controler and PoScope USB PC oscilloscope

Offline boutje

*
  • 25 25
    • vvmracing racing parts
Re: MPG problem
« Reply #2 on: January 06, 2014, 02:55:50 AM »
Ok, but in the second profile everything in the pokeys setup is the same.
All the buttons are working fine only the mpg not.
Logged

Offline NeoTO

*
  • 504 504
    • PoLabs
Re: MPG problem
« Reply #3 on: January 06, 2014, 04:12:49 PM »
1. Did you enable MPG1 in port & pins configuration (there should be nothing setup in the fields for port and pin)?
2. What DRO is MPG mapped to in PoKeys configuration?
Logged
www.poscope.com home of PoKeys USB HID, IO, USB, Ethernet controler and PoScope USB PC oscilloscope
Pages: 1   Go Up
« previous next »