i have this code in the signal script,

if (sig == mc.ISIG_INPUT1) and (state == 1) then
local inst = mc.mcGetInstance()
mc.mcCntlCycleStart(inst)
end

but what if i have two inputs

something like this  : 

 if ((sig == mc.ISIG_INPUT1) and (state == 1)) and ((sig == mc.ISIG_INPUT10) and (state == 1))
local inst = mc.mcGetInstance()
mc.mcCntlCycleStart(inst)
end


how do i do that ?

thank you its working )

BTW , can i use this method in a sig table also ?

yes but it`s a little bit different look in the mach 4 scripting manual it under manuals on mach web site

Found out that the piece of script from poppabear isn't working as intended. If you only activate one of either inputs the task wil already be executed.
the correct way to do this is.

local Input1 = 0;
local Input10 = 0;
local hSig = 0;

hSig = mc.mcSignalGetHandle(inst, mc.ISIG_INPUT1);
Input1 = mc.mcSignalGetState(hSig);

hSig = mc.mcSignalGetHandle(inst, mc.ISIG_INPUT10);
Input10 = mc.mcSignalGetState(hSig);

if ((Input1 == 1) and (Input10 ==1)) then
    local inst = mc.mcGetInstance();
    mc.mcCntlCycleStart(inst);
end


I hope it is to some use.

Marco.
end