Hello
Guest
it is
September 01, 2024, 05:22:25 AM
Guest
Login
Register
Menu
Home
Help
Search
Login
Register
YouTube
Machsupport Forum
/
Mach Discussion
/
General Mach Discussion
/
DRO question
« previous
next »
Print
Pages:
1
Go Down
Author
Topic: DRO question (Read 1387 times)
0 Members and 1 Guest are viewing this topic.
NormB
169
Norm
DRO question
«
on:
October 01, 2018, 09:23:53 AM »
Finally almost finished with configuration but something is strange not sure why. When I auto zero Z the DRO registers correctly 2" where I set it to be after zeroing but when I look at machine coordinates I see a crazy number like .485 I am not sure why it is not agreeing with my work coordinates. Any help is greatly appreciated.
http://
Logged
TPS
2,524
Re: DRO question
«
Reply #1 on:
October 01, 2018, 01:41:56 PM »
i think you have to read a Little bit about machine coordinates and work coordinates.
machine coordinates will only be set to Zero by doing a reference with reference Switches.
Logged
anything is possible, just try to do it.
if you find some mistakes, in my bad bavarian english,they are yours.
Print
Pages:
1
Go Up
« previous
next »