Thanks guys,

Great news...I recieved the PCI Multi I/O card from Rogers and stuck it in the Dell 531 and installed the software(Net Mos) on the CD that came with it
and it is running a my Bridgeport with 1800 oz motors with Mach 3 and communicating perfectly.  I changed the resources hex number in
Mach 3 to what it assigned itself in Windows XP (9C00). The brand they sent was "For BEST Ports Connection" I did not check the voltage, but it is not missing steps which is usually the problem with the 3.3 volt output parallel ports. It must be 5 volts output, but I'll check with seller..

Thanks again guys
Danny

 

Brett