Hello Guest it is December 26, 2024, 07:35:04 PM

Author Topic: Mach lathe losing position  (Read 9948 times)

0 Members and 1 Guest are viewing this topic.

Offline Hood

*
  •  25,835 25,835
  • Carnoustie, Scotland
Re: Mach lathe losing position
« Reply #20 on: April 05, 2012, 05:42:16 PM »
Good to hear, having too much in backlash will make it travel too far on reversals. Best to measure what backlash you actually have with a clock and enter the correct value if you want to use comp.

Hood