Having same problem as reported by cliffh in 2007 - will load on one computer and not another. Must be a simple answer to this problem, surely?

After receiving 20855 license for Mach3, copied to Mach3 directory OK, but still shows as demo, no name, and limited gcode?  See attached license.
I appreciate the help.


Edit - License file removed for security reasons - Tweakie.

Unzip the license file that was sent to you.
Open the folder mach3.
Open the folder JOHN……….
Copy the file Mach1Lic.dat into your C: Mach3 folder.

On restarting Mach3 you will have Licensed To: John………... and the demo restrictions removed.

Tweakie.

Half way there...  there was no folder named John........ So I pasted Mach1Lic.dat into Mach3 Directory.  It ran all gcodes without limits, but when I
looked at license under help, the name was not mine.   It was  MaoAA Dtonas?

The license file you previously posted here was the correct file, the one you have just installed on your PC is not the correct file.

I have tested your license file and it is working correctly and displaying your name.

Go back to your original email from Licensing to get the correct zip file, unzip it and copy that Mach1Lic.dat into your Mach3 folder.

Tweakie.

Thanks again, I'll give it a try today.

Thanks Tweakie,  that solved that problem.

I am pleased that you have it sorted.

Tweakie.