Hello Guest it is January 15, 2025, 03:09:31 AM
Profile Guest
« previous next »
Pages: 1   Go Down

Author Topic: Is there "Driver Test" in Trial Mach3  (Read 2300 times)

0 Members and 1 Guest are viewing this topic.

Offline bigforkg

*
  • 3 3
Is there "Driver Test" in Trial Mach3
« on: March 02, 2018, 12:27:44 PM »
hello, I have spent at least 3 hours looking and cant find the " Driver Test program". Is it in the trial version of Mach3? What I have is a Gecko G540, UC100 controller, windows 10 64 bit laptop.

thanks in advance for the help.   
Logged

Offline joeaverage

*
  • 7,587 7,587
Re: Is there "Driver Test" in Trial Mach3
« Reply #1 on: March 02, 2018, 01:10:43 PM »
Hi,
DriverTest.exe is a means of testing a parallel port. You don't (can't) have a parallel port ergo DriverTest.exe won't work. It should still be in the main
Mach3 folder.

Craig
Logged
'I enjoy sex at 73.....I live at 71 so its not too far to walk.'

Offline Tweakie.CNC

*
  • *
  • 9,283 9,283
  • Super Kitty
Re: Is there "Driver Test" in Trial Mach3
« Reply #2 on: March 03, 2018, 01:46:09 AM »
Hi Bigforkg,

When you installed Mach3 for use with UC100 you would not have installed the Parallel Port drivers so DriverTest.exe would not have been copied into your Mach3 folder.

Tweakie.
Logged
PEACE

Offline bigforkg

*
  • 3 3
Re: Is there "Driver Test" in Trial Mach3
« Reply #3 on: March 03, 2018, 10:18:47 AM »
Thank you Crig and Tweakie

What about the " blue screen of death" in the mach3 manual? Is that not a factor because of the UC100?
Logged

Offline ger21

*
  • *
  • 6,295 6,295
    • The CNC Woodworker
Re: Is there "Driver Test" in Trial Mach3
« Reply #4 on: March 03, 2018, 11:56:56 AM »
No. Or yes?

You don't have to worry about the Drivertest with the UC100.
Logged
Gerry

2010 Screenset
http://www.thecncwoodworker.com/2010.html

JointCAM Dovetail and Box Joint software
http://www.g-forcecnc.com/jointcam.html
Pages: 1   Go Up
« previous next »