Hello Guest it is February 05, 2025, 02:04:40 PM
Profile Guest
« previous next »
Pages: 1   Go Down

Author Topic: Setting probe dimensions  (Read 2481 times)

0 Members and 1 Guest are viewing this topic.

Offline knothead

*
  • 14 14
Setting probe dimensions
« on: January 08, 2021, 04:23:58 PM »
Can someone give me a hint as to where I need to input the height of my probe block for Z in Mach 4. Finally got it working and now would like to use it. Any help is appreciated.
Thanks,
Tim
Logged

Offline Brian Barker

*
  • *
  • 3,860 3,860
Re: Setting probe dimensions
« Reply #1 on: January 08, 2021, 07:11:25 PM »
What script are you running and what are you trying to set? Tool offsets ? Fixture offsets ? What type of tool offsets are you doing?  Sorry but this all matters
Logged
Fixing problems one post at a time ;)

www.newfangledsolutions.com
www.machsupport.com

Offline knothead

*
  • 14 14
Re: Setting probe dimensions
« Reply #2 on: January 09, 2021, 09:33:08 AM »
Thanks for replying Brian. What I was looking for was the input area to insert the height of my probe block to compensate for when I used the probe for the Z setting. I found where I needed to do that, so all is good. Appreciate the response.
Tim
Logged
Pages: 1   Go Up
« previous next »