Ha ha just been a long day

bryson
poat your current code.

O1111 (DOES 1 COMPLETE 1 FT FIXTURE)
( W .020 RTV THICKNESS)
(X0 CENTERED ON LEFT RAIL OF FIXT.1)
(Y0 AT EDGE OF PART)
(Z0 AT HIGHEST POINT OF FIXTURE)
(DC 732 AT 45PSI,GREEN PLASTIC TIP)
(5-15-09 REV.= )
G0 G90 G17 G40 G54
(DISPENSING)
G0 X-7.0 Y3.0 Z.5
M00 (VERIFY DISPENSE)
G0 X-.0858 Y-.5
G0 Z0
G01 Z-.26 F20.0 (SET NEEDLE HEIGHT FOR 1)
M00
M98 P17
G90 G0 Z.5
X-7.0 Y3.0
M00 (WIPE TIP OF DISPENSER)
Y24.0(INSTALL GLASS)
M30
%

O17
G0 G91 G17 G40 G54
G01 Y12.18 F180
X.155 Y.155 r .175 F300
G01 X1.48 F180
G17 G02 Y-.155 X.155 r .175 F300
G01 Y-11.50 F180
G17 G02 X-.155 Y-.155 r .175 F300
G01 X-1.48 F180
G17 G02 X-.155 Y.155 r .175 F300
G4P0
G01 Z -.02
G01 X.1
G01 X-.1
G01 X.1
M99
%

G0 G90 G17 G40 G54
you have to add the G64

G0 G90 G17 G40 G54 G64

I added the G64 with no avail.  I think that our machine is a piece and is not capable of making round turns without stopping.

try changing the cv distance tolerance to .1 , and the stop cv on angles to 89 in general config.also depending on your speed and toolpath , polylines instead of arcs work more smooth.

how do i create polylines?

CAn someone give me an example of code generated from polylines.

Please.

thanks,

-Bryson

What is your CV feedrate set to?

CV feedrate = +1