When using the debug tool, it would be nice if  the tool X and Z coordinates were indicated after a debug location has been selected.

In use, as I click along the path, a box would show up adjacent to the tool, indicating the X and Z of the tip. This feature would aid in knowing that the correct tool path was selected for examination.

The tip center is wherever you place your crosshair, and if you don't move the mouse , you will see  Z &X location in the lower left hand corner of the screen.
Note that debug applies to what ever tool is currently selected. It dosn't automaticaly select the tool associated with a selected Toolpath. In fact it dosen't even need a toolpath.

Art ended the development work on LT but nothing wrong with posting desires ....never know.
RICH