Hood there were some arms listed over here on FleaBay. What model do you have?

(;-)TP

Its a FZ12S
Hood

Mark came through last night and brought through the control panel parts he had kindly folded up for me. I managed to get the two main parts welded partially together today and got the holes drilled for fitting to the swivel mount.
 I hopefully will get the angle welded in tomorrow and also a few standoffs in the back to hold a plate to which I will mount the motherboard/HDD etc. I will also be putting the CSMIO/MPG module in there.
 I dont think I am going to get much further with the Chiron at the moment as funds are tight at this time of year so it will likely be into the new year before I can order the CSMIO/IP-A controller and CSMIO/MPG module
Hood

Looks great hood

Thanks.
Managed to get the box fully welded, the angle base for monitor/button and keyboard/MPG plates welded and the monitor/button panel fitted. I have to make a new keyboard/MPG panel up as the engraving is wrong for the new controller, I only have 2 positions for MPG where I need 3 on this one. I dont have a piece of black Alu long enough so will have to make it two part unfortunately.
Hood

Looking good Hood

(;-) TP

Thanks Terry.

Done a nice job Hood

   Looks real good Hood, makes me jealous. LOL

Brett

Thanks
Hood