I went to Mach3 install/config last night and read, but where do I find that configuration?

DID we not just go thru this for X/Y ?  It is done the same way for Z.

(;-) TP

  I just don't want to mess nothing up. wife would not be happy. So if I want the torch closer to the table  1630 would go to 2000. ??



Steps per - 1630
Velocity - 90
ACC - 60
Gs - .155411424
Step pulse - 5
Dir pulse - 3

NO you move the Z axis 1inch and measure how far it really moved. THEN adjust your steps per in motor tuning untill  it is correct.

(;-) TP

What is the name brand of the table or is it homemade?

(;-) TP

It is a homemade table 48x48. I ran an ESAB shadow 500 and 1000 for about 10 years and never had to do any of the technical stuff. We called maintenance. lol. Decided to get this one so my wife cut cut the pretty yard decorations etc and here I am trying to get everything working right. I sure do appreciate the help. will be cutting mostly 12 and 14 guage. maybe some 20 guage stainless.

I really Appreciate the help. Cut out 2 parts and works like a charm.

Glad you have it sparking(;-)

(;-) TP