I need room and I have a converted from a PC board drilling machine base to cnc mill that has X/Y hooked to DC Servo Gecko Drives running Yaskawa Motors. (Toroidal transformer with large Caps)Very large ball screws 30mm dia. plus. I hung a piece of cold rolled plate off of the gantry and have a Z axis,minus the motor the Z axis does have a holder for an 80mm dia spindle.I have the spindle for a hundred, but not the VFD for it any longer. It was running when I took it out of service. I toyed with sprucing it up,or stripping it , but thought if anyone from the area wanted it (McHenry County), they could have it. The table measures 39.39" X 27" and although it is on wheels, it is quite heavy,I'm guessing a little over a  thousand pounds, so it would take a heavy duty trailer to pick it up. I have some pics if you give me an e-mail to send to.
Dave Cooper

Did u give this away already?
Pictures?

I still have it minus the z-axis, I may have enough pieces around to cobble one together though. The spindle is still available. I'll  try to get some pics this weekend.
Coop

It's free right?

Yes, it is on wheels but quite heavy though, would need a trailer with probably a winch or come along.

Please post pictures or pm them to me

I'll  try to post pics tomorrow
Coop