What post processor do I pick when using VCarve pro 8.

firechief

Hi,
I don't know Vcarve but know that in most cases if Mach is not listed as a separate post then its common to
choose a Fanuc post. I do this with my CAM program and it produces one or two quirks that don't go down well
in Mach it is otherwise pretty good. Usually I have to edit 2-3 lines before loading and running in Mach.

Craig

What post processor do I pick when using VCarve pro 8.

firechief

Mach2/3 Arcs .... or  Mach2/3 ATC Arcs .... work just fine.

Tweakie.

Thanks all for your help.